1. Disconnect the power first and confirm that the equipment is in a safe state.
2. Find the motor control box, loosen the line connector, and swap the two wires of the motor power cord.
3. After the above steps, reconnect the connector, turn on the power, and try to operate it again to see if the feed pellet machine works normally.
It is worth noting that the steering replacement method of different models of feed pellet machines may be different. The specific operation needs to be carried out according to the instructions provided by the manufacturer.
Precautions for replacing the steering of the feed pellet machine
When replacing the steering of the feed pellet machine, you need to pay attention to the following points.
1. Disconnect the power and confirm that the equipment is in a safe state to avoid accidents caused by improper operation.
2. When replacing the power cord, make sure that the two wires are swapped correctly, otherwise the equipment may not work properly.
3. Before operation, it is best to check the motor manual of the equipment, familiarize yourself with the working principle and circuit diagram of the equipment, and ensure correct operation.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
4. If you are not sure how to operate, it is recommended to seek technical support from the manufacturer or guidance from professional technicians.
Why do you need to change the running direction of the feed pellet machine? Generally speaking, changing the direction may be related to the following aspects.
1. Product quality: The pellet quality or output of some feed pellet machines will be affected by the running direction, and the direction needs to be changed to obtain higher quality and output.
2. Process production: In some cases, the running direction of the feed pellet machine needs to be changed to adapt to different process production requirements.
3. Equipment maintenance: Sometimes in order to adjust the degree of wear of the equipment or extend the service life of the equipment, it is necessary to change the running direction of the feed pellet machine.