During the use of feed equipment, various faults may occur, which will affect the normal operation and production efficiency of the equipment. Therefore, it is very important to solve the faults in time.
1. The equipment cannot start
1. Check the power plug and socket to ensure that the connection is firm.
2. Check whether the power switch is turned on to ensure that the equipment is powered on.
3. Check whether the power supply voltage is normal.
4. Check the equipment control system to ensure that each control switch is in the correct position.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
2. The equipment runs slowly or pauses
1. Check the transmission part of the equipment to see if lubricating oil needs to be added or wearing parts need to be replaced.
2. Check the load of the equipment to ensure that the equipment runs within the normal load range.
3. Check the feeding system and control system of the equipment to ensure normal operation.
3. The equipment makes abnormal sounds
1. Check whether the fasteners of various parts of the equipment are loose. If they are loose, tighten them in time.
2. Check the transmission part of the equipment, such as whether the belt is worn and the gear is damaged.
3. Check whether the bearings of the equipment need to be lubricated and replaced.
4. The equipment has abnormal heat
1. Check the cooling system of the equipment, such as whether the radiator is blocked and clean the cooler.
2. Check the transmission part of the equipment, such as whether the bearing is overheated and whether lubricating oil needs to be added.
3. Check the working environment of the equipment, such as whether the air circulation is good and whether additional ventilation equipment is needed.