Advantages of automatic wood pellet mill:
The fully automatic electric heating device of wood pellet mill can adjust the dryness and humidity of the material, which can solve the problem of material blockage and non-forming.
Using the principle of two-way rotation of the thrust bearing to automatically adjust the pressure angle, so that the material is not crowded, not bored machine, to ensure the stability of the discharge molding.
The grinding disk is made of special steel and special wear-resistant material, which does not need to be replaced within three years.
On the basis of similar equipment, the technological content and functions of the machine have been improved.
In the operation, the cost of the user is fully considered, the whole automation, less labor.
Automatic wood pellet mill is a high performance fuel forming equipment for compressing wood chips, sawdust, rice husk, straw and other difficult biomass raw materials, and its compression density can be adjusted between 0.8 and 1.3. It can be used to produce various biomass pellet fuels to replace coal burning or produce pellets for breeding industry. The density adjustment of automatic wood pellet machine is simple, mainly the pressure wheel and die gap adjustment, the larger the gap, the smaller the molding density. The larger the gap, the smaller the molding density. The automatic wood pellet mill relies on the shim under the press wheel shaft to adjust the gap. The main structure of wood chip pellet mill consists of feeder, modulator, pelletizer, lubrication system and so on. The working process is that the matching powder material which requires no more than 15% is fed into the feeding auger from the silo, and the suitable material flow is obtained by adjusting the speed of the induction speed motor, then it enters the tempering, and is mixed with steam for tempering through the paddle bar stirring, and the temperature of the powder material can reach 64-84℃ after tempering, and the humidity reaches 14-16%. Then it passes through the inclined trough again and finally enters the pressing chamber for granulation.