Stable Feed Extruder

Pelletizing part: The pelletizing size is determined by the discharge hole. If you want to expand, it is generally 4.5 cm, and 4-5 holes are opened. If you want high output, you can open 10-15 holes without expansion. The small motor can be adjusted forward and backward, and the knife should be forward. When feeding, it is better to start with 3-5 catties of feed and add more water.
After each feeding, disassemble the front cutting part, use a tool hook to immediately disassemble the nut on the extruder head, then start the motor to let the excess feed in the machine flow out, and clean the nut hole plate.