Fast Discharge Feed Extruder

1. Confirm that the power is on and check whether the equipment is running normally.
2. Press the "Start" button, and the equipment can be started after the prompt message appears on the display.

1. Open the feed port and pour the appropriate amount of well-proportioned feed into the feed port.
2. Close the feed port cover and adjust the pressure of the feed port cover to make it fit tightly.

1. Adjust the heating temperature to a suitable temperature through the temperature adjustment button on the control panel.
2. After the heating temperature reaches the set value, you can proceed to the next step.

1. Adjusting the pressure is a key step to ensure the puffing effect.
2. Adjust the pressure in the heating chamber to a suitable value through the pressure adjustment button on the control panel.