Wood Charcoal Carbonization Furnace
Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of wood charcoal carbonization furnace in China. If you're going to buy cheap wood charcoal carbonization furnace made in China, welcome to get more information from our factory. All our products are with high quality and low price.
Our high temperature charcoal furnace price adopts the method of dry distillation and natural carbonizing,heating the inside materials until it produce fuel gas ,tar and final charcoal; 6-8 hours for carbonization and then 4-6 hours for cooling, then the charcoal product can be take out by the hoist. This carbonization stove is our new invention.The inner pot can be hanged outside which saves the cooling time , so the productivity increases largely.It is an ideal choice for mass production.This type of furnace adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. 90% of the redundant smoke can be used in drying and carbonization which saves energy and increases the enterprise revenue. And the operation is very convenient, good safety, high production efficiency, can save a lot of energy, good environmental protection performance.
|
The Main Parameters of Wood Charcoal Carbonization Furnace price |
||||
|
Model |
Capacity |
Inner volume |
Temperature |
Machine Main Parts |
|
QHL-1 |
1.5-2t/24h |
2.75*3 |
400-600degree |
1outer stove, 3inner stoves with 3 caps, 1 3ton lifting device,1smoking tank |
|
QHL-2 |
3-4t/24h |
2.75*6 |
400-600 degree |
2 outer stove, 6 inner stoves with 6 caps, one 3-ton hoisting equipment with e-motor, 1smoking tank |
|
QHL-3 |
4.5-6t/24h |
2.75*9 |
400-600 degree |
3 outer stove, 9 inner stoves with 9caps, one 3-ton hoisting equipment with e-motor, 1smoking tank |
|
QHL-4 |
6-8t/24h |
2.75*12 |
400-600 degree |
4 outer stove, 12 inner stoves with 12caps, one 3-ton hoisting equipment with e-motor, 1smoking tank |
Production process of high temperature charcoal furnace price
Firstly, we open the sealing cover, put the basket on one side. Then we can put the raw materials( such as the wood logs, wood briquettes, wood chips, coconut shell or macadamia-nut shell). If the raw materials are the granular size ( such as coconut shell or macadamia-nut shell). We should put the cylinder venting in the basket firstly. Because there should be enough space inside to guarantee the carbonizing completely.
Then we set up the basket and use the hoisting tools to put it in the main charcoal stove. Also should put the cover and use the sand or mud to seal the connection pats
After doing these preparing work, we begin to heat in the base of the stove by fuel materials. With the temperature of rising, some smoke will come out from the exhaust port
When the temperature of the basket reach to high degree ( different raw materials has different temperature). When the smoke color becomes light yellow, we should connect fume extraction tube at once, let the smoke return back to the stove. Also stop heating by the fuel at the same time. The materials ( wood logs or the shell) are during the progress of carbonizing.When the temperature reach to 450 degree, should stop heating and finished carbonized.Then disconnect the jointing parts. Taking the basket out from the main furnace( can not open the sealing cover) and let the materials cool by themself. When the temperature is about 50 degree, we can open the sealing cover and take out the charcoal.Another two inner stove can be operated as the above method
Hot Tags: wood charcoal carbonization furnace, China, manufacturers, factory, cheap, low price, made in China, Performance Charcoal Carbonization Furnace, Hoist Carbonization Machine, Carbonized Furnace, Charcoal Carbonization Stove, Continuous Carbonization Furnace, Wood Carbonization Stove
Send Inquiry
