Sawdust Charcoal Carbonization Furnace
Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of sawdust charcoal carbonization furnace in China. If you're going to buy cheap sawdust charcoal carbonization furnace made in China, welcome to get more information from our factory. All our products are with high quality and low price.
Sawdust charcoal carbonization furnace are ideal and efficient equipment for anoxic carbonization. The structure is reasonable, the heating energy consumption is saved, the past steam steam cooling system is adopted, the cooling speed is fast, the charcoal quality is high, the production cycle is greatly shortened, and the horizontal condenser can recover the forest tar.
The technical specification of the sawdust charcoal carbonization furnace
| Type | Dimension(mm) | Capacity(kg) | CarbonizationTime(hour) | Cooling time(min) | Weight(kg) |
| KT-300 | 1550*1550*2070 | 900 | 4-6 | 10 | 2200 |
| KT-500 | 1920*1920*2070 | 1500 | 6-8 | 14 | 2800 |
| KT-1000 | 2500*2500*2220 | 3000 | 10-12 | 20 | 3700 |
Working Principle of the sawdust charcoal carbonization furnace:
1) Arrange wood briquettes in furnace, leave 25 cm distance from the briquette to the roof of furnace
2) Close the door of furnace
3) Brn 10 kg wood briquettes, and put into furnace from the top holes.
4) Turn on the air fan
5) Leave a small gap at the top hole to supply a little air, this procedure lasts 6 hours, and during this 6 hours, make the gap smaller and smaller.
6) After 6 hours, watch the smoke from the chimney, compare the color of smoke, if the
smoke become transparent, close the gap completely.
7) Turn off the air fan.
8) Wait the stove become cool, this procedure lasts 6 to 8 hours
9) Open the door, and leave the stove, make sure the gas come out and then check if the
carbonizing is finished
10) If after 6 hours, the smoke is still strong, keep the air fan working, and leave the gap
until the smoke become transparent. Sometimes, this procedure last 8-10 hours.
11) At the end, if the carbonization is not complete, the wood briquettes don’t become
charcoal totally, ignite again, and do as the above procedure
12) The better quality of charcoal needs longer time of carbonizing, best charcoal sounds
like steel, and no smoke when burn.
Hot Tags: sawdust charcoal carbonization furnace, China, manufacturers, factory, cheap, low price, made in China, Charcoal Carbonization Stove, Wood Carbonization Stove, Hoist Carbonization Machine, Carbonized Furnace, Continuous Carbonization Furnace
Send Inquiry
