Briquetting Presses Machine
Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of briquetting presses machine in China. If you're going to buy cheap briquetting presses machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.
Briquetting Presses Machine uses high temperature 400 degree, high pressure to shape wood sawdust powder into wood briquettes. Wood sawdust's moisture should be less than 15%, dimension should be less than 3mm. Wood sawdust briquettes' density is around 1.3-1.5 g/cm3, the burning time is around 3.5-4 hours.
Parameters of Briquetting Presses Machine
|
Model No. |
HTB-1 |
HTB- 2 |
HTB- 3 |
|
Productivity |
150-200kg/h |
200-250kg/h |
260-350kg/h |
|
Motor power (kw) |
15kw |
18.5kw |
18.5kw |
|
Electrical Heater power(kw) |
3*1.5kw |
3*2kw |
3*2kw |
|
Weight(kg) |
400kg |
500kg |
500kg |
|
Size outside |
1650*600*1260mm |
1860*800*1360mm |
1860*800*1360mm |
|
Diameter of briquette |
Ø40 Ø45 Ø50 mm |
Ø60 Ø70 mm |
Ø70 Ø80 mm |
|
Density of Briquettes |
1.2-1.4T/CBM |

application:
As the need of pollution free environment, the product has a large scope of marketing. The briquettes can be used as a substitute of any fuel in following fields :
Boilers : It can be used in the boilers of Paper Mills, Sugar Mills, Dyeing houses, leather, lamination industries, Vanaspati units, Food Processing Units, Oil Extraction Units, Solvent Extraction Plant and many other plants and industries..
Furnace & Foundries : It can be used for metal heating & melting (where melting point is less than 1000d/cel.)
Brick Kilns : It is the total, substitute of steam coal.
Residential & Commercial Heating : For winter heating in Cold areas and Hotels, Canteens, Cafeterias and house hold kitchen appliances etc.
Common faults and troubleshooting of Briquetting Presses Machine
-
After turn on the electrical machine, the moulding-die doesn’t work. When close the biomass briquette machine, the raw material should add water, if not, the molding-die will not discharge the material. So we should clean out the material, which in the circular mould.
-
Productivity slowdown. If the gap between the moulding-die and the compression roller is too large, the productivity will slow down. So when use the machine, the gap, which between the moulding-die and the compression roller, should be adjusted in the minimum range.
Hot Tags: briquetting presses machine, China, manufacturers, factory, cheap, low price, made in China, Briquette Making Machine, Firewood Sawdust Briquette Machine, Charcoal Coal Powder Extruder Machine, Briquette Making Press Machine, 22kw Briquette Machine, Sawdust Briquette Extruder
Send Inquiry

