+8613673050773
Biomass Briquette Pressing Machinery
video
Biomass Briquette Pressing Machinery

Biomass Briquette Pressing Machinery

Our Biomass Briquette Pressing Machinery with higher capacity and lower energy consumption.
Send Inquiry
Product Details ofBiomass Briquette Pressing Machinery

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of biomass briquette pressing machinery in China. If you're going to buy cheap biomass briquette pressing machinery made in China, welcome to get more information from our factory. All our products are with high quality and low price.

 

Biomass Briquette Pressing Machinery is used to make wood briquettes. Its raw material can be stalk, straw , sawdust, coconut shell, rice hust, rice stalk, tree branch and so on. The final wood briquettes can be used as the fuel of boiler or the material to make charcoal.

 

 

Parameters of Biomass Briquette Pressing Machinery

Model No.

HTB-1

HTB- 2

HTB- 3

Productivity

150-200kg/h

200-250kg/h

260-350kg/h

Motor power (kw)

15kw

18.5kw

18.5kw

Electrical Heater power(kw)

3*1.5kw

3*2kw

3*2kw

Weight(kg)

400kg

500kg

500kg

Size outside

1650*600*1260mm

1860*800*1360mm

1860*800*1360mm

Diameter of briquette

Ø40 Ø45 Ø50 mm

Ø60 Ø70 mm

Ø70 Ø80 mm

Density of Briquettes

1.2-1.4T/CBM

   

Biomass Briquette Pressing Machinery

 

1. It can work steadily at the fixed temperature. Rational structure ;
2. The machine makes full use of the farm wastes ,the solid stick is easy to light with high calorific value, high density which is favorable for transportation ;
3. An inner molding is equipped with the shaping mould, which ensures the shape and final size of the products;
4. Low investment and energy consumption, high output, high-quality finished products, easy to operate and maintain, etc.

 

Production step --Biomass Briquette Pressing Machinery

 

1)fastening bolts, especially in the heating barrel set of three top wire, connecting and electrical power lines.
2)check bearing lubrication part.
3)check the supply voltage is normal.
4)no-load starting running 30 minutes, no card, touch the abnormal phenomenon, can be put into normal production.When the trial revealed abnormalities, should immediately stop, find out the reasons, troubleshooting and then makes no-load operation.
5)the temperature regulator adjusted to the required temperature, when the temperature reaches a predetermined temperature before starting, and amount of feed.
6)gradually increased feeding rate, until the production of qualified products, produced when the normal 30 minutes, can show trial run is successful, the normal operation of.
At the end of 7 to make the hopper feeder with no raw material , and after shutting down the machine immediately reversed for 1 minutes, so that the propeller material would be exit.

 

Hot Tags: biomass briquette pressing machinery, China, manufacturers, factory, cheap, low price, made in China, Wood Briquette Press, Wood Charcoal Briquette Machine, Biomass Briquette Machine, Briquette Making Machine, Briquetting Press, Wood Charcoal Making Machine

Send Inquiry

(0/10)

clearall