Fruit Shell Charcoal Production Line

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of fruit shell charcoal production line in China. If you're going to buy cheap fruit shell charcoal production line made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Smokeless Carbon Production Line
Carbonization furnace equipment mainly consists of; inner furnace, outer wall, combustion chamber, end gas burner and other parts. The furnace in the heating chamber needs to be preheated until the generated high temperature and heat are enough to carbonize the raw material, and the soot released during the combustion process can be reused after purified by the purification system.

Making full use of the waste gas generated during the charring process is beneficial to the environment. When the temperature is reached, the bottom of the hanging charcoal stove is completely converted into combustible gas, which can be recycled during the charring process, with high thermal efficiency to achieve energy saving and consumption reduction.

Because the new type dry distillation charcoal furnace consists of inner liner, heat insulation layer, furnace door, railroad car, combustible gas refueling pipe, dehumidifying buffer tank, burner, exhaust pipe, thermometer and so on. Flue gas purification device and gasifier can be configured separately. Various materials can be carbonized.

Burning Resistant Charcoal Production Line

Smokeless Charcoal Stick Production Line

Start-up operation: Turn on the power switch of the briquette machine and start the equipment. Let the briquette machine idle for a period of time to preheat so that the equipment reaches a suitable working temperature. The preheating time depends on the equipment model and ambient temperature, generally 10-15 minutes. According to the characteristics of the raw materials and the specifications of the required charcoal sticks, adjust the relevant parameters of the briquette machine, such as pressure, temperature, speed, etc. Feeding and making charcoal: When the equipment is preheated, start to evenly feed the prepared raw materials into the feed port of the briquette machine. Be careful not to feed too much at one time to avoid blockage. During the briquette making process, closely observe the forming of the charcoal sticks, including the density, hardness, surface smoothness, etc. of the sticks. If problems are found, adjust the humidity, particle size or equipment parameters of the raw materials in time. Take out the finished firewood sticks from the discharge port of the briquette machine and place them neatly aside or on the conveyor belt for subsequent processing (such as carbonization).

High Temperature Charcoal Production Line

High Quality Charcoal Production Line

Shutdown operation:
After completing the rod-making task, stop feeding the rod-making machine first, let the equipment continue to operate, and squeeze out the remaining raw materials.
After all the raw materials in the equipment are squeezed out, turn off the power switch of the rod-making machine.
Clean up the remaining raw materials and debris inside the rod-making machine, clean up the forming cylinder, screw propeller and other parts, and keep the equipment clean.
Maintain the rod-making machine regularly, including checking worn parts, replacing lubricating oil, tightening bolts, etc., to extend the service life of the equipment and ensure its stable performance.

Customer visit

Hot Tags: fruit shell charcoal production line, China, manufacturers, factory, cheap, low price, made in China, Coal Briquetting Machine, Cabbage Cutting Machine, Flavoring Machine, Pomegranate Seed Separator, Potato Washing Peeling Machine With Brush Roller, Weighing Packaging Machine