Strong Body Wood Shaving Machine

Wood chipper is also called wood chipper. It is a machine that can process wood, bamboo, trees, etc. into wood chips. Today we will share the safe operation procedures of wood chipper, hoping to help everyone.
When operating the wood chipper, the operator must be trained, familiar with the structure, performance, use, and maintenance of the machine, and master the safety knowledge of the machine inspection, use, and maintenance. Wear a safety helmet and gloves before operation, do not smoke, and pay attention to fire prevention;
Before operating the wood chipper, check the pulley transmission part, install a belt cover, ensure the safety of the operation, check the tightening of the screws, check whether there are blades, nails and other materials at the feeding port of the machine, and take them out immediately if there are any, so as not to affect the normal feeding operation;
When operating the wood chipper, feed at a uniform speed. Since the machine is equipped with a reasonable speed, feed at a uniform speed when operating the wood chipper, which is also conducive to maintaining stable production;
When installing the blade of the wood chipper, it must be installed firmly, the screws must be tightened, and the amount of butter on the bearing must be checked for lubrication.
When the wood chipper is working, the power can only be turned off after the wood, bamboo and other raw materials are cut. This can keep the cutting studio clean and the feeding smooth.