Fine Wood Shaving Machine
The wood shaving machine adjusts the size of the finished shavings by adjusting the blade angle and the screen diameter. To adapt to...
Send Inquiry
Product Details ofFine Wood Shaving Machine
Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of fine wood shaving machine in China. If you're going to buy cheap fine wood shaving machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.
Best wood shaving machine
Products Description
Big model woodchipper can bechangedintouniformFeeding by belt conveyor, above and below outlet you can choose
After the wood chipper is installed, check the tightness of each component. If any signs of looseness are found, tighten them. At the same time, check whether the belt is tight enough.
Before starting the wood chipper, rotate the rotor by hand to check whether the claws, hammers and rotors are flexible and reliable, whether there is any collision in the shell, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow of the machine, and whether the power machine and wood chipper are well lubricated.
For normal maintenance, the bearings of the wood chipper should be cleaned after every 300 hours of operation. If the bearing is lubricated with engine oil, it is advisable to fill 1/3 of the gap in the bearing seat when adding new engine oil, and no more than 1/2 at most. Before operation, just tighten the oil cup cover a little. When the bearing of the wood chipper is severely worn or damaged, it should be replaced in time, and attention should be paid to strengthening lubrication; if tapered roller bearings are used, attention should be paid to checking the axial spacing of the bearings to keep it at 0.2-0.4 mm.
Before starting the wood chipper, rotate the rotor by hand to check whether the claws, hammers and rotors are flexible and reliable, whether there is any collision in the shell, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow of the machine, and whether the power machine and wood chipper are well lubricated.
For normal maintenance, the bearings of the wood chipper should be cleaned after every 300 hours of operation. If the bearing is lubricated with engine oil, it is advisable to fill 1/3 of the gap in the bearing seat when adding new engine oil, and no more than 1/2 at most. Before operation, just tighten the oil cup cover a little. When the bearing of the wood chipper is severely worn or damaged, it should be replaced in time, and attention should be paid to strengthening lubrication; if tapered roller bearings are used, attention should be paid to checking the axial spacing of the bearings to keep it at 0.2-0.4 mm.
Product Picture
Hot Tags: fine wood shaving machine, China, manufacturers, factory, cheap, low price, made in China, High Efficiency Shave Chipper Wood Shaving Machine, Wood Shaving Pulverizer Machine, Diesel Wood Shaving Machine, Low Cost Wood Shaving Machine For Homeuse, Wood Shavings Mill For Pet Bed, Wood Shaving Machine
Send Inquiry
