Metal Circuit Board Shredder
Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of metal circuit board shredder in China. If you're going to buy cheap metal circuit board shredder made in China, welcome to get more information from our factory. All our products are with high quality and low price.
The sawdust is pumped into the dust removal tank through the fan and transported through the pipeline. The sawdust flows out of the dust bag. Before the automatic wood crusher finishes working, the materials in the crushing chamber must be crushed and pumped into the dust bag before the power can be unplugged to keep the automatic wood crusher room smooth.
When the machine and the environment wood are fixed, stable and continuous feeding can increase the unit time output value of the wood crusher.
The wood should be as dry as possible. Wood with too high water content directly affects the destructive power of the wood crusher, which we have analyzed before.
The wood should be pure and free of impurities such as iron blocks and stones, otherwise it will cause certain harm to the blades and hammers of the wood crusher.
After investigating that the wood crusher is working completely normally, gradually start to discharge the material. When discharging the material, we should investigate whether the feeding is normal. When putting in the wood, we should pay attention to the stability and balance of the speed. Others should determine the feeding speed according to the size and dryness of the wood block. For example, for wood with high moisture content, the feeding speed should be slower. In fact, we advocate drying the wood as much as possible or processing it later.
Start-up preparation: Check the safety hazards of the machine. The fire-fighting equipment is installed in a suitable place and functions well. After the equipment is shut down for a long time or exposed to rain, the distribution box, motor, and line insulation are well ventilated, and all parts of the equipment are clean, maintain good heat dissipation, and prevent blockage. Check the transmission system of each part, and the chain is tightened appropriately. The equipment adopts frequency conversion control and is sensitive to dust. The electrical system must be clean and dust-free, and the joints of each line must be firm. Therefore, profit is an important driving force of the market.
The hydraulic system is also clean and dust-free to prevent dust from entering the oil tank and affecting the hydraulic system. Check whether there are iron blocks, stones and other debris in the machine. Non-staff members must stay away from the wood crusher.
In summary, the wood chip machine efficiently processes raw materials into finished wood chips through the dual crushing functions of blade cutting and high-speed airflow impact. It has a compact structure, reasonable layout, convenient operation, safe use, low noise, low energy consumption, and high output. It is one of the important equipment in the wood processing industry.
Hot Tags: metal circuit board shredder, China, manufacturers, factory, cheap, low price, made in China, Sawdust Making Machine, Mobile Sawdust Machine, Sawdust Machine
Send Inquiry
