Penny-a-line Tooth And Claw Crusher

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of penny-a-line tooth and claw crusher in China. If you're going to buy cheap penny-a-line tooth and claw crusher made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Overall, the tooth and claw crusher is a highly effective machine that uses sound design principles to ensure reliable and efficient crushing of materials. Its durability, ease of maintenance, and compact design make it a valuable addition to any industrial operation.

Crusher plays a very important role in mining production. The equipment will be subject to friction and collision with sand and gravel materials during use, resulting in wear and damage, which makes it easy to malfunction during use. Therefore, it is necessary to do a good job of equipment maintenance during use to avoid affecting normal production and extend the service life of the crusher.
1. Crusher safety operating procedures
1. During operation, the operating door is allowed to be opened only after the machine stops completely;
2. Only after the crusher stops completely can foreign objects inside the equipment be cleaned;
3. When inspecting, repairing and maintaining the crusher equipment, cut off the power supply and hang a warning sign;
4. The cables and wires of the matching motor should have protective sleeves, and the lines should be used normally;
5. The V-belt protective cover should be kept intact at the connection between the motor and the equipment.
2. Equipment maintenance procedures
1. Check the fasteners of the crusher regularly to ensure that they are not loose;
2. Check the working condition of the bypass mechanism at the specified time;
3. Check the tightness of the spring every month and make necessary adjustments;
4. The roller bearing needs to be lubricated once every month, and lithium-based grease is used as the lubricant;
5. Check the wear of the roller teeth once a month, and the rollers with severe wear should be repaired or replaced;
6. Check the operation and wear of the connecting V-belt regularly, as well as the tension of the V-belt, and replace the worn V-belt in time.

Customer visit

Hot Tags: penny-a-line tooth and claw crusher, China, manufacturers, factory, cheap, low price, made in China