Tooth And Claw Crusher

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of tooth and claw crusher in China. If you're going to buy cheap tooth and claw crusher made in China, welcome to get more information from our factory. All our products are with high quality and low price.

There are four external forces exerted on the material during the crushing process: rolling, shearing, impact and grinding. Rolling is mainly used for coarse and medium crushing. Suitable for crushing of hard and large materials. Shearing is mainly used for crushing or crushing. Suitable for crushing of tough or fibrous materials.

1. Start-up process
Before starting the machine, you must ensure that the reducer has been filled with reducer oil and the bearings have been filled with lubricating oil.
Before starting the machine, first check whether there are foreign objects in the crushing chamber and whether the vulnerable parts are damaged. Only start the machine after there are no abnormal conditions.
Check whether the control switches of the electric control box are in the open state, and ensure that there are no safety hazards in the electric control box before starting the machine.
2. Feeding process
Carry out feeding operations according to the production capacity, feeding range, and discharging range of the crusher. Please keep it uniform and continuous, and avoid feeding too fast or too slow to avoid blocking and affecting production efficiency.
3. Do a good job of initial screening
It is inevitable that various foreign objects and debris will enter the material. At this time, it is particularly important to do a good job of screening. Equipment such as iron removers can be added to remove the debris and avoid equipment failure and shutdown caused by iron overload.
4. When crushing is completed
The machine should be shut down after the remaining materials in the crushing chamber are crushed, and no materials should remain in the crushing chamber; after the work is completed, the power switch should be turned off in time, the materials scattered around the crusher should be cleaned, and the screws at the joint between the motor and the reducer should be checked for looseness.

Customer visit

Hot Tags: Tooth And Claw Crusher, China, manufacturers, factory, cheap, low price, made in China, Charcoal Crusher Machine Wood Sawdust Equipment, Charcoal Hydraulic BBQ Carbon Rod Machine, Cheap Tooth And Claw Crusher, 1000set Peanut Roaster Peanut Peeler Peanut Butter Making Machine, Wood Shredder Machinery For Lawn Forestry 3000 12000kg, Worth Repurchasing Tooth And Claw Crusher