High -crusted Wood Crusher

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of high -crusted wood crusher in China. If you're going to buy cheap high -crusted wood crusher made in China, welcome to get more information from our factory. All our products are with high quality and low price.

It is strictly forbidden to operate the machine under the age of 16.
In order to ensure the safety and normal work of personal and machines, special persons should be responsible for keeping and use. Before learning this regulation and operation technology, the machine shall not be operated at will.
Check whether the screws at the binding are loose, especially the screws of the blade and fixed knife. Pay attention to it. If there is loosening, tighten it immediately.
It is strictly forbidden to remove it into the bucket and remove it directly
When replacing the knife and a sieve, it is not allowed to replace it with ordinary fasteners.

Ensure the normal discharge of wood chips and their waste. There are two ways of upper and lower discharge. It mainly includes fan blades, discharge pipes or nets.
The blades of the chipper are plate-shaped, bucket-shaped and box-shaped, which are installed on the circumference of the cutter disc or on the back of the cutter disc. The plate-shaped blades rotate with the high speed of the cutter disc, pushing the wood chips to produce circular motion; because the blades push the air, an airflow with a certain wind speed and wind pressure is generated, so that the wood chips are ejected along the discharge pipe in the tangential direction of the casing. However, this structure is easy to break the wood chips and increase the amount of debris, so the plate-shaped blades are gradually replaced by bucket-shaped and box-shaped blades. Due to the high circumferential speed of the chipper, there are no blades on the cutter disc, and a fan is installed on the discharge pipe to blow the wood chips, or a lower discharge method is adopted.
The chipper usually does not install blades on the circumference of the knife roller, and uses the lower discharge to allow the wood chips to pass through the screen and be sent away by the conveyor belt or pneumatic force. A fan can also be installed on the discharge pipe of the drum chipper to discharge the wood chips in the upper discharge method.

Customer visit

Hot Tags: high -crusted wood crusher, China, manufacturers, factory, cheap, low price, made in China, Penny a line Tooth And Claw Crusher, 1000set Peanut Roaster Peanut Peeler Peanut Butter Making Machine, Charcoal Hydraulic BBQ Carbon Rod Machine, Worth Repurchasing Tooth And Claw Crusher, Charcoal Crusher Machine Wood Sawdust Equipment, Cheap Tooth And Claw Crusher