Mini Oil Press Machine

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of mini oil press machine in China. If you're going to buy cheap mini oil press machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Mini oil press machine is mainly composed of motor, press chamber, press rod, press chamber seat, feed hopper, heating jacket, base, press chamber cover, outer box, cooling fan, control switch, etc.Its structure characteristic is: both ends of the motor output shaft processing has a pressing rod installation deep hole, squeeze rod installation in this deep hole, vats chamber inside, installed in chamber activities and squeezing and chamber seat through the locating pin fixation and squeeze rod has a certain gap, pressing chamber to install into the hopper into the mouth, pressing chamber bottom open oil outlet, press the front chamber equipped with slag elbow, cooling fan installed in the outside, at the bottom of the base balance are installed on the foot.The handle of the outer box is equipped with a handle, and a reverse switch is specially installed for convenient equipment handling and cleaning.

The parameter of the mini oil press machine

Advantage of the mini oil press machine

(1) Electric control box:Fully automatic control of the machine saves manpower and efficiency. (2) Discharge hopper:Material enters from here. (3) Screw axis:Press the material to extract the oil from the material. (4) Filter:Filter out impurities in the oil to improve the quality of the oil. (5)Frame:Support the machine to ensure that the machine works properl.

Hot Tags: mini oil press machine, China, manufacturers, factory, cheap, low price, made in China, Oil Expelling Machine, Cold Oil Press, Screw Oil Press Machine, Automatic Screw Press Machine, Cold Oil Press Machine, Screw Oil Press