When using straw feed processing equipment, the problem of being too coarse or too fine often occurs, which not only affects the quality and nutritional value of the feed, but also affects the working efficiency and life of the equipment. Therefore, it is very important to solve the problem of being too coarse or too fine in straw feed processing equipment. Here are some ways to solve this problem:
The processing effect of straw feed processing equipment is related to parameters, including processing speed, discharge port size, screen size, etc. The problem of being too coarse or too fine can be solved by adjusting these parameters. For example, by replacing screens of different specifications, particles of different sizes can be obtained. By adjusting the size of the discharge port, the discharge amount and particle size can be controlled.
The humidity and hardness of the straw will also affect the processing effect of the processing equipment. If the straw is too wet or too hard, it will lead to uneven processing and particles that are too large or too small. Therefore, when using straw feed processing equipment, the raw materials need to be processed to make them suitable for the requirements of the equipment.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Equipment wear can also lead to poor processing results. If the blades, screens and other parts of the equipment are worn, the particles will be too large or too small. Therefore, it is necessary to regularly check the wear of the equipment and replace the worn parts in time to ensure the normal operation of the equipment.
Feeding the raw materials too fast or too slow will also lead to poor processing results. If the raw material feed speed is too fast, the particles will be too large; if the raw material feed speed is too slow, the particles will be too small. Therefore, it is necessary to control the feed speed of the raw materials to ensure the stability of the processing effect.
Different models of straw feed processing equipment are suitable for different processing tasks. If you need to process different types of straw, you need to choose suitable equipment. At the same time, you also need to consider the processing efficiency and processing quality of the equipment to ensure the stability of the processing effect.