During the feed processing, the feed pellet machine often has the problem of poor pelleting effect, which is mainly manifested in uneven pellets, rough pellet surface, and fragile pellets. These problems will seriously affect the quality and production efficiency of feed pellets. In response to these problems, the following are several methods to solve the poor pelleting of feed pellet machines.
1. Check the feed raw materials
The pelleting effect of the feed pellet machine has a lot to do with the feed raw materials. If the water content of the feed raw materials is too high or too low, the quality is uneven, etc., it will affect the pelleting effect. Therefore, it is necessary to fully inspect and screen the feed raw materials to ensure that the quality of the raw materials meets the requirements.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
2. Adjust the pelleting parameters
The pelleting effect of the feed pellet machine is also related to the pelleting parameters, such as pressure, temperature, speed, etc. If the pelleting pressure is too low, the temperature is too high, the speed is not appropriate, etc., it will affect the formation and quality of the pellets. Therefore, it is necessary to adjust the pelleting parameters appropriately according to the specific situation to obtain a good pelleting effect.
3. Replace the mold
The mold is one of the key factors affecting the quality of pellets. Problems such as mold wear or uneven mold holes will lead to poor pellet quality. Therefore, it is necessary to replace the mold in time according to the actual production situation and ensure that the mold quality meets the requirements.
4. Control feed humidity
The pelleting effect of the feed pellet machine is also related to the humidity of the feed. If the humidity of the feed is too high or too low, it will affect the formation and quality of the pellets. Therefore, it is necessary to control the humidity of the feed to ensure that the humidity is moderate.