Square Bagging Machine

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of square bagging machine in China. If you're going to buy cheap square bagging machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Rectangular Mushroom Bagging Equipment

1. The light curtain irradiator will immediately stop bagging if it finds someone or an obstacle inside the bagging machine, and will work normally after the obstacle is removed, directly avoiding hand pinching and effectively avoiding industrial accidents.
2. The core components of the mainboard of the tying machine are rainproof and anti-static, effectively avoiding non-human short circuits and maintaining long-term efficient operation.
3. The rod box of the tying machine is tightly protected, using a 304 stainless steel rain cover and internal tying nest plate controls to maintain a smooth and long-term stable working life. It can effectively prevent rust and rain weathering.

Mushroom substrate bagging equipment

Mushroom Rectangular Bagging Equipment

The tying machine is fully automatic, different from the traditional semi-automatic simple bagging and tying machine. It adopts the integrated process operation of bagging and tying. According to the requirements of the mainboard control instructions, the tightness of the tying is quantified, and the tightness of the produced mushroom sticks is highly consistent. The intelligent fully automatic standardized mode takes the output effect and the requirements of the bag material as the key factors. It operates 24 hours a day and produces more than 20,000 bags a day. It is suitable for medium and large growers. Small growers are not recommended to buy it.Or you can just ask us and we'll give you sound buying advice.

Agricultural Mushroom Bagging Equipment

Mushroom Bagging Equipment

1. The barrel mouth of the edible fungus bagging machine should be checked regularly to ensure that there are no thorn-like protrusions or gaps to avoid puncturing the barrel bag during bagging.
2. The bagging should be appropriately tight. The material stick after loading should feel like a wooden stick when picked up by five fingers. It is better to use moderate force without sinking. If the material stick feels sunken when you grab it, or the two ends are slightly heavy and there are signs of broken bags, it means that the loading is too loose. If the loading is too loose, the barrel bag and the material will be emptied when the material stick is transported. During inoculation, the film at the hole mouth will vibrate up and down, causing a pressure difference between the inside and outside of the film near the inoculation hole. The spores of miscellaneous bacteria can enter the hole with the air flow, causing pollution.
3. The bag mouth should be cleaned and tied tightly. When tying the mouth, compact the material by hand, and remove the culture material adhering to the bag mouth. First, tie the bag mouth tightly with a plastic thread close to the culture material, and then tie the bag mouth film back and tighten it. It is required to be airtight, otherwise the tied mouth is easily contaminated by Neurospora and Mucor during the fungus period.

Qualifications and Honors

Hot Tags: square bagging machine, China, manufacturers, factory, cheap, low price, made in China, sweet potato digger, Persimmon Peeling Machine, transportation tractor, potato combine harvester, Sinking Fish Feed Mill Machine, power compost spreader