+8613673050773
Wood Pellet Making Machine

Wood Pellet Making Machine

This machine is the main feed machinery product produced by our factory at present. Is my factory technical personnel at home and abroad advanced flat model based on particle machine, accumulated many years of production experience and research, improvement, carefully manufacturing feed machinery,usegear transmission from the traditional do belt drive slippage, belt wear too fast, and designed with different models, a variety of models, are farmers, feed processing ideal processing machinery.
Send Inquiry
Product Details ofWood Pellet Making Machine

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of wood pellet making machine in China. If you're going to buy cheap wood pellet making machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.

 

Causes of unstable current of wood pellet mill.
1. When the weight of feed is equal to the weight of discharge, the current is stable and unchanged. This is the most ideal state.
When the feed weight is greater than the discharge weight, that is to say, there will be part of the material left inside the machine, and the machine will inevitably do work on this part of the material when it is running, so that the machine will consume more energy and the current will become larger. When the feeding quantity is too small, the current will be stable but the capacity will be reduced and the energy consumption will be wasted. Therefore, the uniform feeding amount is the key to our control.
3. The dividing knife wears seriously, which leads to uneven dividing; if the dividing material is not uniform, causing the pressure stick to eat material unevenly, the same will cause the current to be large and small phenomenon crown shell machinery original.
4. The raw material contains hard impurities, such as iron or stone. Because when the pressure stick rotates to the position of the stone or iron block, the squeezing pressure of the equipment increases sharply, causing the current to suddenly become large, and the current will drop after passing this position.

To solve the wood pellet machine current is large and small methods are as follows.
1. Screen the raw materials before feeding, remove the large pieces, and do a good job of iron removal treatment.
2. Regularly check the wear and tear of the dividing knife and replace it when necessary.
3. The control of feeding quantity needs to increase the frequency feeding device to ensure the uniformity of feeding.
 

Model Power(kw) Capacity(kg/h) Dimension(mm) Weight(kg)
SKJ-350 30 400-600 1300*530*1220 900
SKJ-400 37 600-800 1390*650*1290 1100
SKJ-450 55 800-1000 1620*700*1600 1500
SKJ-550 75 1000-1200 1700*700*1600 1800

 

feed pellet machine22

Hot Tags: Wood Pellet Making Machine, China, manufacturers, factory, cheap, low price, made in China, Vertical Pellet Mill, Ring Die Pellet Mill, Diesel Engine Pellet Machine, wood chip pellet machine, Machine To Make Wood Pellets, straw pellets machine

Send Inquiry

(0/10)

clearall