Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of high efficiency and cheap sawdust pellet machine in China. If you're going to buy cheap high efficiency and cheap sawdust pellet machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.
The wood pellet machine only needs one person to operate the production, (the raw material for producing pellets is 150 yuan per ton, the electricity or diesel fee is 50 yuan per ton, the labor fee is 50 yuan per ton, the pellet machine wear fee is 20 yuan per ton, the total is 270 yuan, pellets The market price of fuel is 600 yuan per ton, 600 yuan minus 270 yuan, which is the net profit of 330 yuan per ton of pellet fuel per day). The pellet machine can produce 8 hours a day.
| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm | 1000kg |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm | 1500kg |
There are two aspects to the correct operation of the pellet machine: one is to make the equipment fully efficient and increase the output, and make the pellet quality meet the requirements; the other is to be able to use and maintain the equipment correctly and extend its service life.
Before the pellet machine is correctly operated and used, the relevant parts of the machine should be adjusted. Secondly, the pellet machine should be tested and inspected before operation and use. Only in this way can the pellet machine be operated and used correctly.
Start-up steps: After the test run is normal, the machine can be officially started. When starting the machine, you should pay attention to the order of starting the machine. The order should be from bottom to top. The steps are as follows:
1. Prepare for inspection according to the steps of the test run.
2. Adjust the steam pressure and release the condensed water in the steam pipe.
3. Start the main motor of the pellet machine
4. Start the conditioner motor
5. Start the feeder motor and adjust the feeder to the lowest speed.
6. Open the discharge door and the steam inlet valve at the same time, slightly adjust the feeder motor speed, and after the material is pressed and discharged, gradually adjust the feeder speed and steam addition to the appropriate level.
7. Adjust the cutter to make the pellets of suitable length.
8. Further adjust the feeder speed to make the working current reach the rated current value, and adjust the steam flow accordingly to make the temperature and humidity suitable.
Hot Tags: high efficiency and cheap sawdust pellet machine, China, manufacturers, factory, cheap, low price, made in China, wood chip pellet mill, wood particles machine, Diesel Engine Pellet Machine, Vertical Pellet Mill, Wood Pellet Mill, wood chip pellet machine
