Name: China Diesel Feed Extruder Manufacturers, Factory - Low Price - Mikim
Brand: MIKIM
SKU: 217765164

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of diesel feed extruder in China. If you're going to buy cheap diesel feed extruder made in China, welcome to get more information from our factory. All our products are with high quality and low price.

feed extruder

Products Description

feed extruder machine

At present, most feed mills in my country use ring die pelleting to produce aquatic feed. The hard pellet feed produced by ring die pelleting sinks to the bottom of the water for 10 to 20 minutes and then collapses, with poor feeding properties. Some of it remains in the water environment, causing serious water pollution. However, extruded feed is a high-quality, environmentally friendly feed with low pollution, less waste and high conversion rate after high temperature and high pressure. Therefore, aquatic extruded feed has gradually replaced hard pellet feed to become the mainstream of aquatic feed.

feed extruder machine

The use skills of feed extruder are undoubtedly the key link that every animal husbandry and breeding industry practitioner needs to master. This is not just a simple machine operation, but also a direct impact on feed quality, animal health and breeding benefits. First of all, you must have a full understanding of the start-up and preheating process of the feed extruder. Just like the preparation before cooking by a chef, preheating is the basis for ensuring the extrusion effect. Before starting, check whether all parts are intact and lubricated enough to ensure that the machine runs in the best condition.

Model	70	85	100	135
Installed Power	90KW	145KW	170KW	240KW
Real Consumption	63KW	102KW	120KW	165KW
Capacity	150-200KG/HR	300-500KG/HR	1000-1500KG/HR	2000-3000KG/HR

Reasonable control of feed amount and puffing temperature is the key to ensure feed quality. Feeding too fast or too slow, and puffing temperature too high or too low will affect the puffing effect of feed. This is like the heat and ingredients in cooking, which need to be carefully adjusted to achieve the best effect.
Daily maintenance and care of the feed puffing machine is also very important. Clean the inside of the machine regularly, replace worn parts, and ensure that the machine runs in the best condition. This can not only extend the service life of the machine, but also ensure the continuity and stability of feed puffing.

Product Picture

feed extruder machine

Hot Tags: diesel feed extruder, China, manufacturers, factory, cheap, low price, made in China, Floating Fish Feed Machine, Pet Dog Feed Machine, Floating Dog Feed Pellet Machine, Electric Pet Feed Extruder, Floating Fish Feeding Pellet Machine, Small Animal Feed Pellet Machine