Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of animal pellet making machine in China. If you're going to buy cheap animal pellet making machine made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Poultry Animal Feed Pellet Making Machine Price

Product Overview

This machine is the main feed machinery product produced by our factory at present. Is my factory technical personnel at home and abroad advanced flat model based on particle machine, accumulated many years of production experience and research, improvement, carefully manufacturing feed machinery, use gear transmission from the traditional do belt drive slippage, belt wear too fast, and designed with different models, a variety of models, are farmers, feed processing ideal processing machinery

Application and Features

1, the machine is mainly used for raising and exempting industry, fish, duck, chicken, shrimp, pig, cattle and sheep as well as industrial pellet processing, widely used in industry, plastic pellet, organic fertilizer pellet, wood pellet.

2. Corn can be added directly without crushing. The granular feed processed by this machine has a smooth surface, moderate hardness, low temperature rise in the process of processing and can better maintain the internal nutrients of raw materials.

Note: corn is not crushed to add, particle composition is not uniform as far as possible.

3. The particle composition is uniform and the shape is neat. The diameter of the particle can be divided into medium 2, medium 2.5, medium 3, medium 3.5, medium 4, medium 5, medium 6, medium 7, medium 8 and so on. 4, through squeezing and can kill general pathogenic microorganisms, parasites can prevent the occurrence of some diseases. Because of the low moisture content of pellet feed, it is convenient for storage and can be kept in the water for a long time, which greatly improves the utilization of feed.

Method of use

1. Add hyperbolic gear oil to the gearbox before starting the gearbox

2. Install the granulator smoothly, adjust the belt tightness, whether the steering meets the requirements, whether the screws in each part are loose, relax the adjusting screws on the roller shaft seat, so that the feed machine is in a no-load state, and can be put into use after starting and running normally.

3, the first use of the new machine before taking 10 jin saw foam (or grass powder) vegetable oil or waste tighten the gap adjusting screw after mixing oil well and start the machine, so that the two pressure is very one. Even add refueling feed, at the same time continue to screw the pressure wheel to adjust the screw to the surface, squeeze the grain, repeated rolling squeeze, so that the mold hole lubrication smooth back door slowly add the required processing of mixed feed processing, such as feeling the mold hole resistance is large, wide low or material can be repeated grinding template according to the above method, so that smooth after processing

4, in the feed processing such as more fine fiber, should add about 5% of the water such as mixed feed concentrate more can be considered to reduce the amount of water, after processing, add a little oil mixed with edible oil in advance, is conducive to the next boot, avoid stop after feed dry in the hole

5. After processing, loosen the gap adjustment screw to make the roller in a free state and remove the upper and lower parts after stopping the machine. The remaining materials in the warehouse accumulate scale, especially the remaining materials under the bottom of the swing plate to avoid damaging the bearing.

Matters attention:

1. When using, it should be noted that there should be no stones, iron and other foreign bodies in the raw material. After working for more than ten shifts, the wheelset should be disassembled and the bearing should be added with high-temperature oil to make the wheel work well and prolong the service life of the bearing.

2. When granulating, it is forbidden to contact the press roller and the template to run idle. At the same time, tighten the press plate nut to avoid loosening and damaging the spindle keyway.

3. If the granules are broken or pressed uncompacted, the formula of crude fiber feed should be reduced to less than 50%

4. There is no granulation when granulation, no material, should be removed from the template, after casting hole by hole, appropriate to add some fiber feed can be restarted granulation.

5. Check the tightness of the belt frequently, change the oil seal in time if there is oil leakage in the gearbox, and regularly check the press shaft of the nose to see if there is oil shortage.

The correct use of gear oil:

priority is given to the hyperbolic heavy load gear oil for heavy vehicles produced by regular manufacturers. (The oil drum is marked with hyperbolic heavy load gear oil)

The gear oil plays the role of lubrication, cooling, rust prevention and buffering.

The hyperbolic gear used in the transmission of this machine has the advantages of large local transmission number ratio, smooth transmission, and can improve the strength of the pinion.

The quality of the hyperbolic gear oil directly affects the service life of the gear, the viscosity of the gear oil is too low, the oil film is not formed between the tooth surface, so that the wear is aggravated, the form of the hyperbolic gear lubricating oil is the tooth surface abrasion, the light cause scratches, the heavy make the gear grinding into a knife shape, the high temperature in the gear.

Hot Tags: Animal Pellet Making Machine, China, manufacturers, factory, cheap, low price, made in China, Flat Die Feed Pellet Machine, Sinking Fish Feed Mill Machine, Chicken Feed Making Machine, Diesel Pellet Mill, Electric Pellet Mill, PTO Driven Pellet Mill