Honeycomb Press Machine
The raw materials of the honeycomb press machine will by formed by the punching needles of the machine and the final products have high density and easy to burn, long lasting burning as well.
The moulds can be customized, diameter of the moulds ranges at 80-300 mm. Furthermore, different shapes of the moulds also available, such as round, cubic, porous, plum flower form etc,
It is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc.)
The parameter of the honeycomb press machine
|
Working type |
Model |
Capacity for coal |
Capacity for charcoal |
Power |
|
Extruding Type
|
ET-1 |
200-250kg/h |
500kg/h |
11+0.55kw |
|
ET-2 |
250-500kg/h |
500-1000kg/h |
18.5+1.1kw |
|
|
ET-3 |
1500kg/h |
not suitable for charcoal |
22+3kw |
|
|
Pressing Type
|
YM-140 |
1.86-2tons/h |
0.93-1ton/h |
7.5kw |
|
YM-160 |
1.86-2tons/h |
0.93-1ton/h |
11kw |
|
|
YM-220 |
1.25tons/h |
2.5tons/h |
15kw |
Installation and trial running of the honeycomb press machine
1. The first machine leveling, firmly fixed on the basis of cement.
2. Cleaning the machine oil and debris, the transmission, moving parts filling lubricants.
3. Check the various parts of the screw is loose.
4. Adjust the rotation, stamping and other parts of the position and clearance, adjusted after the hand wheel moving pulley, the running parts should be free to operate.
5. The host pulley turn clockwise for the turn. Do not reverse the motor before turning on the motor. Turn the motor to the same direction as the large wheel of the rotating machine before installing the V-belt test machine.
6. The first test machine when the motor with a point of law for the pulse rotation, if no other noise, normal operation before driving. Do not start the heavy vehicle until the machine is running normally before feeding production.
Trial Running:
1. Before driving, we must first check whether the machine fasteners loose, whether there is impurities on the body, pull the wheel by hand to see whether the accuracy of punch into the mold tube and mold hole at the right.
2. The rotating parts, bearing regularly scheduled to refuel.
3. After starting to pay attention to the oral hearing machine no noise and other abnormalities. Such as abnormal phenomenon should be immediately parked maintenance.
4. Such as the punch stuck, should immediately cut off the power supply, standby stop after the punch and mold cylinder in the coal removed after re-driving, the machine is strictly prohibited by hand to take debris in order to avoid accidents.
Hot Tags: honeycomb press machine, China, manufacturers, factory, cheap, low price, made in China, Honeycomb Briquette Press
Send Inquiry
